- 12v24v waterproof hybrid wind solar
Application: Solar System Controller
Application: Voltage Controller
Application: Wind Controller
Application: Lighting Controller
Model Number: LHWP-RC-0510
Maximum Current: 15A
Gross Weight: 1KG
Controller Size: 11.8cm*10.8cm*3.6cm
Max Out put power: 50W/12v, 100W/24v
Max Wind Power: 150W/12v, 300w/24v
Max Solar Power: 130W/12v, 260w/24v
Load function: PWM, BOOST output
water proof grade: IP67
suitable: Lead acid Battery / Gel Battery/Lithium Battery
If you have any question for the shipping cost please feel free to contact me.
1. IP67 waterproof grade, aluminum shell design, make this controller can effectively prevent corrosion.
2. Identify 12V/24V system voltage automatically.
3. You can modify and read the parameters by the wireless remote-controller.
4. All digital high-precision load power control, the highest efficiency can reach 97%.
5. Three period adjustment function, the user can set the working time and power of LED lights. (as follow shows)
6. Wide range of output voltage, can adapt to a variety of series parallel LED lights.
7. Three output modes, can be used in light and monitoring equipment.
8.The working parameters is adjustable.
9.Over-discharge protection; over-charge protection; anti-reverse connection, Over-load protection, Electronic short circuit protection.
10. Improved multistage charging algorithm, Prolong the service life of battery.
11. Inside and outside temperature sensor, with high precision temperature compensation function.
12. the parameters can be saved in the controller, without repeated settings.
13. LED display. please check the detailed pictures.
14. PWM or Boost constant current function,
If the voltage of your load is higher than your battery, then choose Boost output please, for example, 24V battery with 36V LED light.
If the voltage of your load is same with the battery, then choose PWM output please. for example, 24V battery with 24V load.
3. Detailed technical parameters
4. Electrical Connection
1. Choose mounting location, controller size: 124mm*97mm*36.5mm
2. It can be used in 12V or 24v system.
3. Connect the load, within rated power.
4. Connect the battery, then the controller can read the system voltage Automatic.
5. Connect the solar panel and wind turbine.
5. State shows
Load working model
6. Product details
Temperature protection function: The controller can detect the temperature of the hardware, when the hardware temperature is too high, the controller can reduce the charging current, prevent the damage to hardware because of too high temperature.
Temperature compensation function: the controller can detects the environment temperature, and according to the environment temperature, it adjust the voltage point of the battery to ensure that the battery can be charged full in cold or hot environment.
Economy 400W 12V or 24V 5 blades wind turbine generator with hybrid controller small start speed for solar system
MPPT Wind Solar Hybrid Charge Controller Dump Load For wind/solar hybrid charging controller system above 12/24V 400W fan
2000W Boost MPPT Wind Solar Hybrid Controller for 0~1000W Turbine Generator & Panels hybrid charge regulator
New Arrival!! 1400w 12/24V Off Grid MPPT Solar Wind Hybrid Boost Charge Controller for home wind solar hybrid system
400w wind turbine Max power 600w 3 blades small mill low start up generator +900w solar hybrid controller
600W max wind generator 5 blades turbines, 12V/24V turbine with CE,ROHS,ISO9001+wind/solar hybrid controller